Setting the clock, Setting the clock 1 – Sony RG590S User Manual

Page 10

Advertising
background image

10

GB

MHC-GX470/RG590S/RG490S/RG290/RG190.GB.2-668-367-11(1)

To use the remote

Slide and remove the battery compartment lid

, and insert the two supplied R6 (size AA)

batteries,

 side first, matching the polarities

shown below.

Notes

• With normal use, the batteries should last for about six

months.

• Do not mix an old battery with a new one or mix

different types of batteries.

• If you do not use the remote for a long period of time,

remove the batteries to avoid damage from battery
leakage and corrosion.

Setting the clock
1

Press

/ (power)

to turn on the

system.

2

Press CLOCK/TIMER SET

.

If the current mode appears on the display,
press

/

repeatedly to select

“CLOCK SET” and then press ENTER

.

3

Press

/

repeatedly

to set the hour, and then press
ENTER

.

4

Use the same procedure to set the
minutes.

When you turn off the system after setting
the clock, the clock display appears instead
of the demonstration display.
The clock settings are lost when you
disconnect the power cord or if a power
failure occurs.

Advertising
This manual is related to the following products: