Sony PCV-RX480DS - Manual (Page 60)

VAIO Digital Studio™ System Reference Manual 46
To install a 3.5-inch internal hard disk drive (all models)
1
Configure the jumpers on the new drive as a slave device (see your
drive’s documentation for configuration instructions).
2
Remove the side cover (see “Removing the Side Cover” on page 28).
3
Disconnect the drive connector (A in diagram).
4
Disconnect the power connector (B in diagram).
5
Pull out on the tab (C) that secures the drive holder to the chassis.
Power
connector
Jumpers
Drive
connector
A
B
C
Disk drive holder
Tab
Power supply
connector
Drive connector