Install the stand, 01 getting started – Samsung 6500 User Manual
Page 5
5
01
Getting Started
English
Install the Stand
s
s
s
s
s
Stand (1EA)
Guide Stand (1EA)
Screws (10EA)
Follow the steps below to connect the TV to the stand. (50 inch model only)
1. Connect the Guide Stand to the Stand using five screws (M4 X L12).
s
s
s
s
s
s
2. With your TV upright, connect the TV to the Stand.
3. Fasten two screws (M4 X L10) at position 1, and then
fasten three screws (M4 X L10) at position 2.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the PDP TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
[
Do not insert your fingers into the stand base slot of the TV when installing the stand base.
5 EA (M4 X L12)
5 EA (M4 X L10)
s
s
s
s
s
Top view
Rear
Front
Rear
Guide Stand
Screws (M4 X L12)
Stand
Screws (M4 X L10)
1
s
s
s
s
s
2
[PC6500_USA]BN68-02581A-03Eng.indb 5
2010-06-24 오후 4:48:16