Sony DAV-HDX465 - Manual (Page 34)

34 US
B
a
si
c
Op
er
a
ti
o
ns
Selecting the connected
component
You can use a VCR or other components
connected to the TV/VIDEO jacks on the rear
panel. Refer to the operating instructions
supplied with the components for further
information.
Press FUNCTION repeatedly until “TV/
VIDEO” appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
TV/VIDEO t DMPORT t AUDIO t …
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the TV/VIDEO jacks
on the rear panel or to the AUDIO IN jack on the
front panel. This is not a malfunction and will
depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1
Press FUNCTION repeatedly until “TV/
VIDEO” or “AUDIO” appears in the
front panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press
or c.
4
Press X/x to select a setting.
The default setting is underlined.
• “ATT ON”: attenuates the input level.
The output level is changed.
• “ATT OFF”: normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Enjoying the Radio or
Other Components
FUNCTION
SYSTEM
MENU
X/x/c,