Using the pc settings, 36 using the pc settings – Sony BRAVIA KDL-23S2010 User Manual

Page 36

Advertising
background image

Using the Menus

36

Using the PC Settings

Option

Description

Wide Mode

Normal

Select to display in the original resolution.

Full1

Select to enlarge the picture to fill the display area, keeping its original
aspect ratio.

Full2

Select to enlarge the picture to fill the display area.

Reset

Resets the current setting to the default values, except Wide Mode and Power Management.

Auto Adjustment

Select to automatically adjust the display position and phase of the picture when the TV
receives an input signal from the connected PC. Note that Auto Adjustment may not work
well with certain input signals. In such cases, manually adjust the options below.

Auto Adjustment for PC can also be set using the TOOLS button on the remote

control.

Phase

Adjust after Pitch to fine tune overall sharpness.

Pitch

Adjust uneven sharpness on screen.

For the PC Input Signal Reference Chart, see page 45.

Horizontal Center

Allows you to move the position of the picture left and right.
Press

B/b

and press

to choose a correction between Min, – 49 to + 49 and Max.

Vertical Center

Allows you to move the position of the picture up and down.
Press

V/v

and press

to choose a correction between Min, – 49 to + 49 and Max.

Power Management

On

Select to automatically switch to the power saving mode when there is
no signal input for 30 seconds.

Off

Select to turn off Power Management.

Power Management is not VESA-compliant.

Advertising
This manual is related to the following products: