Sony HTD-710SS - Manual (Page 23)

En
jo
yi
ng
Surr
ou
nd
So
un
d
masterpage:Right
lename[D:\Sony SEM
5\Revision_HTR210SS\J9050956_2599618112HTR210SS_GB\2599618112\GB05SND_HTR-
10SS-CEL.fm]
23 GB
model name1[HTR-210SS]
[2-599-618-11(2)]
In this mode, the receiver outputs the sound
from the front left/right speakers and subwoofer
only.
When multi channel surround formats are input,
the signals are downmixed to 2 channel with
bass frequencies being output from the
subwoofer.
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the subwoofer.
Press 2CH to select “2CH ST.”.
The receiver switches to the 2CH STEREO
mode.
Decoding the input audio
signal automatically (AUTO
FORMAT DIRECT)
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the subwoofer.
Press A.F.D. repeatedly to select “A.F.D.
AUTO”.
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
Enjoying Surround Sound
Using only the front
speakers and subwoofer
— 2CH STEREO
Enjoying higher fidelity
sound
continued
GB01COV_HTR-210SS-CEL.book Page 23 Wednesday, May 18, 2005 10:15 AM