Sharp IM-DR410E - Manual (Page 44)

03/7/21 IM-DR410E_6.fm
44
IM-DR410E
IM-DR410E TINSE0550AWZZ
Ne
t M
D
-T
ra
n
s
fe
rr
in
g
D
a
ta
-
Transferring Data
! Checking out
Check-out is to transfer tracks to OpenMG compatible
players. You can check out recorded tracks with BeatJam
up to 3 times.
Follow the instructions below to take out the MD after
check-out:
! Checking in
Check-in means to return the tracks from external
devices to the PC. You can check-in tracks only to the
source PC.
Caution:
" If the USB connection or the power supply to the com-
puter or the MD portable recorder is cut off during
check-in or check-out operation, audio data may be
lost.
" If a checked-out track is deleted in another computer,
it cannot be checked in any more.
TOC writing on an MD:
" TOC writing will start when check-in or check-out is
complete. Whilst writing, TOC indicator on the unit will
flash. (Refer to page 15.)
1
Connect this unit to the PC.
"PC" appears on the unit display and operations with
the unit are disabled.
However, "PC" is not displayed whilst in the record-
ing, recording pause or menu operation mode.
2
Transfer music files to the unit (check-out).
For details, refer to the manual of BeatJam.
1. Remove the USB connector from the MD portable re-
corder.
2. Turn off the MD recorder.
3. Remove the MD.
1
Connect this unit to the PC.
"PC" appears on the unit display and operations with
the unit are disabled.
However, "PC" is not displayed whilst in the record-
ing, recording pause or menu operation mode.
2
Return a music file to your PC.
For details, refer to the manual of BeatJam.