Sony BVM-D20F1U - Manual (Page 65)

59
Chapter 2 Menu
Overview
Structure of the STATUS Menu
Setting Lists of the STATUS Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see “About
menu numbers” on page 23.
• The arrow mark ( ÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not
have any sub-list.
[F] STATUS menu
Select the STATUS menu 1/3, 2/3 or 3/3. ÷ [F1]
[F1] STATUS menu (1/3)
Specify the channel block to be detected from channel
1 to channel 99.
[F11] CH STATUS menu (1/3)
Data about the current channel is displayed.
CH: channel number
SL: slot number
IN: input connector number
FORMAT: format of the input signal
NAME: channel name
[F2] STATUS menu (2/3)
Data about the monitor is displayed.
MODEL NAME: model name
SERIAL NO: serial number
OPERATION TIME: operation time (in hours)
SOFTWARE VERSION: software version
[F3] STATUS menu (3/3)
Data about circuit boards installed into the respective
slots in the rear panel is displayed. When the BKM-
21D is installed in SLOT 2, the following is displayed.
When any optional boards are not installed, EMPTY is
displayed for SLOT 2 to SLOT 5.
SLOT1: CONTROL
SLOT2: SDI4:2:2/4FSC
SLOT3: EMPTY
SLOT4: EMPTY
SLOT5: EMPTY
SLOT6: VIDEO AMP
SLOT7: DEFLECTION
SLOT8: EMPTY (BVM-D20F1U/D20F1E/D20F1A)
or DIGITAL UNIF (BVM-D24E1WU/
D24E1WE/D24E1WA/D32E1WU/
D32E1WE/D32E1WA)
SLOT9: POWER SUPPLY
[F31] SLOT STATUS menu
Select the desired slot. Data about the optional board
installed in the selected slot is displayed.
MODEL NAME: Model name of that optional board
SERIAL NO: Serial number of that circuit board
[F]
Displaying Information About the Monitor
— STATUS Menu
STATUS F STATUS (1/3) F1
STATUS (2/3) F2
STATUS (3/3) F3
CH STATUS F11
MODEL NAME
SLOT STATUS F31
CH
MODEL NAME
SERIAL NO
Main Menu Level 1 Level 2 Level 3
The STATUS menu is used to view general data about
the monitor status, the current channel, etc.
The following information is displayed on the three
pages of the STATUS menu.
• Data about the current channel (STATUS menu
(1/3))
• Data about the monitor in use (STATUS menu (2/3))
• Data about the circuit boards installed into the
slots in the rear panel (STATUS menu (3/3))