Samsung Flight II SGH-A927 - Manual (Page 150)

146
Recorded Audio Folder
This folder shows a list of audio clips that have been recorded
and saved. To access this folder, use the following steps:
1. Touch ➔ My stuff ➔ Audio ➔ Recorded Audio.
2. Touch a pre-recorded memo from the list to begin
playback.
3. To exit, press or press .
Record Audio Settings
To configure the filename and maximum length for a recording.
1. From Idle mode, touch ➔ Tools ➔ Record audio ➔
Settings.
2. Touch either of the following fields and edit the
information:
• Default name : allows you to use the on-screen keypad to enter a
prefix name of all recorded audio files. Touch OK to store the new
name.
• Recording time : allows you to choose the maximum limit allowed
for the recorded audio file (1 Minute, 2 Minutes, 3 Minutes,
4 Minutes, 5 Minutes, 60 Minutes, or Limit for MMS).
3. Touch Save.
Alarms
This feature allows you to name an alarm and set it to ring at a
specific time.
1. Touch ➔ Tools ➔ Alarms ➔ Tap to create. The
following options display:
• Alarm name: allows you to use a specific name for the alarm. The
name appears on the display when the alarm activates.
• Alarm time: allows you to set the time at which the alarm sounds,
adjust the Hour, Minute, and AM/PM values manually (Keypad) or
using either the +/-, or up and down buttons, or by quickly sliding
your fingertip over the numbers (Jog). Touch Set to save the new
values.
Note: To change the time format, see “Time and Date” on page 60.
• Alarm repeat: use this option to set the repeating status for the
alarm. Touch the box next to each day you would like to use for the
current alarm. Touch the box next to Everyday to select all days.
Touch the box next to Once only to activate the alarm only one time
at the Alarm time. Touch Save to save the repeat option.
• Snooze: use this option to set a Snooze duration (5, 10, 15, 20, or
30 minutes) and a Snooze Repeat (1, 2, 3, 5, or 10 times).
• Set details: allows you to modify the following additional features:
– Alarm type: sets the way in which the alarm sounds when activated
(Melody, Vibration, Vibration then Melody, Vibration & Melody).