Sharp MD X5 - Manual (Page 11)

10
1
7
3
2
1
3
DISPLAY
Arrow
MINIDISC OPERATION
H H H H H
Loading and playing MiniDiscs
1
Press the MD
H
button.
I
The power will be turned on automatically, and the unit will enter the MD
playback mode.
2
Load a recorded MiniDisc in the direction indicated by the arrow on the
MiniDisc, with the labeled side facing up.
I
The total number of tracks and the total disc playing time will be
displayed.
I
The music schedule will be displayed only for the number of tracks on
the disc.
I
If the MD contains more than 21 tracks, “
Y
” will appear.
I
If an untitled MD is inserted, no disc name will be displayed.
3
Press the MD
06
button.
I
Playback will begin from track 1 on the disc you have specified.
I
If the disc has track names, the track names will be scrolled across the
display.
I
When the last track has been played back, this unit will stop automati-
cally.
To interrupt playback:
Press the MD
06
button.
Press the MD
06
button to resume playback from the same point.
To stop playback
Press the MD
H
button.
To remove a MiniDisc:
Press the
7
button.
I
The MiniDisc will be ejected.
Notes:
I
Although vibration will not normally cause a MiniDisc to skip, you may
hear a skip in the sound if there is continuous vibration.
I
When you listen to MiniDiscs near a radio or a TV set, the radio or the
TV set may pick up noise.
Keep the unit as far away as possible from tuners.
After use:
Press the POWER button to turn the power off.
Note
I
The power cannot be turned off while the unit is reading the information
on a MiniDisc.
Direct playback:
If a MiniDisc is loaded in the unit, pressing the MD
06
button turns the
power on, and begins playback.
To check a track name or the date of a recording during
playback:
Press the DISPLAY button on the remote control during playback.
I
Each time this button is pressed, the display will switch.
I
In the following cases, disc names, track names and recording dates will
not be displayed:
• A MiniDisc that has not been given a disc name or track name
• A MiniDisc that does not have a recording date on it
Disc name
Total number
of tracks
Music schedule (More tracks indicator)
Total
playing time
Track name
Level meters
Remaining recording time
Recording date
*01-21 98.6.23, 10:09 AM 10