Sony DSC-P71 - Manual (Page 62)

62
filename[E:\307435114DSC71PUC\02GB-DSCP31UC\10ADV.FM]
masterpage:Left
model name1[DSC-P71/P51/P31]
[3-074-351-14(1)]
To cancel Spot light-metering
Press the MENU button again, select
(SPOT METER) using b/B on the control
button, then select [OFF] using v/V. The
Spot light-metering aiming point
disappears, and the camera returns to
normal light-metering.
For the DSC-P51/P31
a Set the mode dial to , SCN,
or .
b Press B ( ) on the control
button to turn Spot light-
metering on.
The Spot light-metering aiming point
appears.
c Aim the Spot light-metering
aiming point at the spot you
want to shoot, then shoot your
image.
To cancel Spot light-metering
Press B ( ) on the control button to turn
Spot light-metering off. The Spot light-
metering aiming point disappears, and the
camera returns to normal light-metering.
Shooting multiple
frames
– CLIP MOTION
Mode dial:
You can shoot a number of still images
consecutively (GIF animation). Because the
file size is small, these images are ideal for
use on a home page, or for attaching to an e-
mail message.
• Clip Motion images are restricted to color
levels of 256 colors and below. This is a
characteristic of GIF format recording. For this
reason, the image quality of some images may
deteriorate.
NORMAL (160×120)
The maximum number of frames you can
shoot in one Clip Motion shot is ten. This is
the best choice for use on a home page.
MOBILE (120×108)
Two frames is the maximum number that
can be shot in Clip Motion in this mode.
• MOBILE mode has strict file size limits, so
picture quality falls accordingly.
• For the number of images you can record using
Clip Motion, see page 91.
01cov.book Page 62 Wednesday, May 22, 2002 3:40 PM