Step 3: connecting the audio cords – Sony BDP-S2000ES User Manual

Page 12

Advertising
background image

12

Step 3: Connecting the
Audio Cords

Select the connection that best suits your system. Be sure to read
the instructions for the components you wish to connect.

*1

Manufactured under license from Dolby laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.

*2

Manufactured under license under U.S. Patent #: 5,451,942 & other
U.S. and worldwide patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Digital
Out are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights
Reserved.

Notes about the HDMI OUT jack

• When you connect the player to an AV amplifier (receiver)

using an HDMI cord, you will need to do one of the following:
– Connect the AV amplifier (receiver) to a TV with the HDMI

cord.

– Connect the player to the TV with a video cord other than an

HDMI cord (component video cord, S VIDEO cord, or video
cord).

• When connecting to the HDMI OUT jack, carefully align the

HDMI connector with the jack. Do not bend or apply pressure
to the HDMI cord.

• If you change the component connected to the HDMI OUT

jack, change “Audio (HDMI)” in “Audio Setup” to match the
new component (page 47). The player stores the HDMI related
settings for up to five components.

• The HDMI connection is compatible with 2ch Linear PCM

signals (48 to 192 kHz, 16/20/24 bit), and 6 to 8ch Linear PCM
signals (48 to 96 kHz, 16/20/24 bit), in addition to Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS (include
DTS-ES, DTS96/24) and DTS-HD High Resolution Audio
bitstream.

Note

If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will come out from the speakers, which
could damage your ears or speakers.

Connection

Your setup

TV

Stereo amplifier (receiver) and
two speakers

AV amplifier (receiver) having a
Dolby

*1

Surround (Pro Logic)

decoder and 3 to 6 speakers
• Surround effects: Dolby Surround

(Pro Logic)

AV amplifier (receiver) with
5.1ch input jacks and 6 speakers
• Surround effects: Dolby Digital

(5.1ch), DTS (5.1ch)

AV amplifier (receiver) with a
digital input jack having a Dolby
Digital or DTS

*2

decoder and 6

speakers
• Surround effects: Dolby Digital

(5.1ch), DTS (5.1ch)

AV amplifier (receiver) with an
HDMI input jack having a Dolby
Digital Plus, Dolby TrueHD, or
DTS-HD High Resolution Audio
decoder, and 8 speakers
• Surround effects: Linear PCM

(7.1ch), Dolby Digital Plus,
Dolby TrueHD, DTS-HD High
Resolution Audio bitstream

A

B

C

D-1

D-2

D-3

Advertising