Seagate BARRACUDA GREEN ST2000DL003 - Manual (Page 13)

Barracuda Green SATA Product Manual, Rev. B 13
www.seagate.com Drive Specifications
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on
operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase
acoustic and power to operational levels.
2.2 Formatted capacity
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on
operating environment and formatting.
2.2.1 LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where
n is the number of guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit
addressing support of drives with capacities over 137GBs.
2.3 Default logical geometry
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where
n is the number of guaranteed sectors as defined above.
Warranty To determine the warranty for a specific drive, use a web browser to
access the following web page:
support.seagate.com/customer/
warranty_validation.jsp
From this page, click on the “Verify Your Warranty” link. You will be asked
to provide the drive serial number, model number (or part number) and
country of purchase. The system will display the warranty information for
your drive.
Load/Unload cycles 300K at 25°C, 50% rel. humidity
Supports Hotplug operation per
the Serial ATA Revision 3.0
specification Yes
Model
Formatted
capacity*
Guaranteed
sectors
Bytes per sector
ST2000DL003 2000GB 3,907,029,168 4096
ST1500DL003 1500GB 2,930,277,168 4096
Cylinders Read/write heads Sectors per track
16,383 16 63
Table 1 Drive specifications summary for 2000GB and 1500GB Models (Continued)
Drive specification ST2000DL003 ST1500DL003