Sony GV-HD700E - Manual (Page 17)

17
G
e
tti
ng St
a
rte
d
DV format pictures (GV-HD700/1)
HDV format pictures (GV-HD700E/1)
DV format pictures (GV-HD700E/1)
On the battery pack
• Before changing the battery pack, set the
POWER switch to OFF (CHG) and turn off the
POWER/CHARGE lamp (p. 14).
• The POWER/CHARGE lamp flashes during
charging, or Battery Info (p. 16) will not be
correctly displayed under the following
conditions:
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery
Info only).
– The battery pack is too cold.
Replace the battery pack, or remove it and put
it in a warm place.
– The battery pack is too hot.
Replace the battery pack, or remove it and put
it in a cool place.
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of the VCR, even when the power
cord (mains lead) is disconnected from the wall
outlet (wall socket).
On the charging/playback time
• Times measured with the VCR at 25 °C (77 °F)
(10 to 30 °C (50 °F to 86 °F)) is recommended).
• The available playback time will be shorter
when you use the VCR in low temperatures.
• The available playback time will be shorter
depending on the conditions under which you
use the VCR.
On the AC Adaptor
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Battery pack
LCD panel
opened LCD panel
closed
NP-FM50 80 130
NP-QM71D 205 315
NP-QM91D 315 475
NP-F570
(supplied)
160 245
NP-F770 335 510
NP-F970 500 760
Battery pack
LCD panel
opened LCD panel
closed
NP-FM50 75 115
NP-QM71D 190 285
NP-QM91D 290 430
NP-F570
(supplied)
150 225
NP-F770 310 460
NP-F970 465 690
Battery pack
LCD panel
opened LCD panel
closed
NP-FM50 80 130
NP-QM71D 205 315
NP-QM91D 315 475
NP-F570
(supplied)
160 245
NP-F770 335 510
NP-F970 500 760