SRS Labs SR850 - Manual (Page 131)

DISPLAY AND SCALE MENU
Full
Settings
Input/Output
Single
Display Scale
Monitor
Format
Up/Down
Top
Bottom
Type: Chart
Trace: 1
± 1.000 e0
@ 0.0
10 S /div
Center
Format
Full, Top or Bottom Display
DISPLAY
SCALE
Type
Monitor
Seconds/div
Range
Trace
Display and Scale
The Display and Scale menu selects the screen format, the displayed
traces, and the display types. The bar graph and chart display scales
may be adjusted in this menu. See the Operation section for more infor-
mation about the different displays.
Format The Format key toggles between single and dual display screen formats.
In dual display format, the [ACTIVE DISPLAY] key selects the active dis-
play for Auto Scale and Cursor functions.
Monitor The Monitor key toggles the monitor display between displaying the lock-
in settings and the lock-in inputs and outputs. The monitor display is the
upper two lines of the screen.
The settings monitor displays the sensitivity, dynamic reserve, time con-
stant and rolloff, signal filters, and input configuration.
The Input/Output monitor displays the values of X, Y, R and
θ
as well as
the rear panel Aux Inputs.
Display Scale Each of the displays (full screen, top and bottom) has a Type (bar, chart
or polar). Bars and charts display one of the four data traces. Polar
graphs always plot X and Y. Bars and charts have a range and center
trace value. Charts have a horizontal scale as well.
See the Operation section for a complete description of each type of
display.
5-21