SRS Labs SR850 - Manual (Page 45)

2-33
10. Press [DISPLAY/SCALE]
Press <Type / Trace> to highlight the type of
the top display.
Use the knob to change the display type to
Chart.
1 V to 5 V in 100 seconds updating every second.
The output voltage is measured on Aux In 1,
recorded in Trace 1 and displayed on the top
graph.
Show the Display and Scale menu.
The top display is a bar graph. Let's change it to a
chart to show the history of Aux In 1.
The chart display shows the history of the sweep.
The SR850 can be used as a general purpose 4
channel digital chart recorder. The displays can be
scaled vertically and horizontally with full cursor
readouts. Data can be stored on disk and output to
a printer or plotter.
Aux Outputs and Inputs