Sharp UX-B700 User Manual

Page 54

Advertising
background image

Sending a Fax From Memory

52

Sending a Fax From Memory

You can scan a document into the fax’s memory and send the document from
memory. This increases transmission speed and allows you to send a fax to
multiple destinations in a single operation. After transmission, the document is
automatically cleared from memory.

Note: If a power failure occurs while sending a fax from memory, you will need
to repeat the operation.

Broadcasting (sending a fax to multiple destinations)

This function allows you to send the same fax to as many as 20 different
destinations in just one operation.

When sending to multiple destinations, only auto-dial numbers can be used
to dial the numbers of the receiving machines.

1

Load the document(s).

If desired, press

to set

the resolution and/or contrast.

2

Press .

3

Select a destination using one of the following methods:

Press a Rapid Key.

Press

and enter a 2-digit Speed Dial number.

Press

or

until the name of the destination appears in the display

(if no name was stored, the number will appear).

RESOLUTION/

RECEPTION MODE

START/

MEMORY

SPEED DIAL

READY TO SEND

Advertising