Samsung MP-43 - Manual (Page 12)

10
Operating your sound system - DAB
1. Fully extend the telescopic aerial.
2. If your sound system is in standby mode, press the On / Standby
button to switch it on.
3. Press and release the Radio button to select DAB mode. The display
will show "DAB" for a few seconds.
4. If this is the first time the sound system is used a quick scan of UK
Band III DAB channels may be carried out (depending on whether
scanning was already completed in standby mode). If the radio has
been used before, the last used station will be selected.
5. When first switched on, the first station in the list of stations found will
be played. The display will show the station name on the upper line
of the text display and broadcast information on the lower line.
6. If the station list is still empty after the scan operation or if the
selected station cannot be received your radio will display "Station
not available".
7. If no signals are found it may be necessary to relocate your sound
system to a position giving better reception, and then repeat the scan
using the Auto-tune facility (see Finding New Stations on page 13).
Note that radio station name and frequency displays shown in this user
guide may differ from those that you see on your radio. Broadcasters may
change radio station names that are transmitted, and the frequencies
used for DAB and FM radio stations may not be the same in all parts of
the country.
2
3
DAB
DAB
DAB
DAB