Samsung MP-43 - Manual (Page 20)

18
Dynamic Range Control (DRC) settings - DAB only
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.
1. Press the On / Standby button to switch on your sound system.
2. Press and release the Menu button so that "Station order" appears
on the display.
3. Press and release the Tuning Up or Down buttons until the display
shows "DRC value".
4. Press and release the Select button to enter the DRC adjustment
mode.
5. Press and release the Tuning Up or Down buttons to select the
required DRC setting (the default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Press and release the Select button to confirm the setting. The display
will then return to the previous radio display mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
2
3,5 3,5
4,6
1
DAB
DAB
DAB
DAB