Samsung AH68-00939B - Manual (Page 15)

GB
15
You can check or change your selection of tracks at any time.
Press once if you have started listening to the selection.
Press Program.
Result: The following indications are displayed:
(C = Check, 01=Program No, DI = Disc No, – – – = Track No on the disc)
If you have already programmed 30 tracks, C is displayed
instead of P when you press Program.
Press Program again.
Result: The first track selected is displayed, together with the letter
C (Change).
Press Program one or more times until the track to be changed is displayed.
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
Press and or turn Multi Jog to select a different track.
Press Program to confirm your change.
Press VCD/CD ( ) to start listening to the selection.
Result: The first track selected is played.
When selecting the tracks of numbers larger than 3 digit figures (figures
from the number 100), please use the Digit buttons.
Checking or Changing Programmed
Tracks
1
2
3
4
5
6
7
8
On/Standby
1 2 3
4 5 6
7 8 9
TAPE
AI Sleep Deck 1/2
Return CD Repeat
Slow Sound
Key Control
Zoom
+10/0 Mono/ST.
Mute Disc Skip
Volume
Tuning
Mode
Volume
PREV NEXT
VCD / CD
# b
Timer
On/Off
Counter
Reset
Disc
View Time
Search
Band
PREV NEXT
-- Disc Selection / Direct Play --
Disc 1 Disc 2 Disc 3 Disc Change
Mul ti Function Multi Jog
/Clock
Mono/ST
REC/Pause
Down
PREV. Next
Normal
Dubbing
HI - Speed
CD
Synchro
Program
Shuffle
Return/Enter
Pow
Surro
S.BA
E
D.S
Pho
CD
Repeat
Preset/
Memory
Deck 1/2 REV.Mode
VCD/CD
AUX TAPE
TUNER Band
D / P / S
DIRECT PLAY & SELECTION
CD–R/RW PLAYBACK
Up
Tuning Mode
MIC Mixing
Echo
MIC 1
MIC 2
MIN MAX
Disc 1 Disc 2 Disc 3
VCD/CD
Down
PREV. Next
Up
Tuning Mode
5
8
2,3,4,7
6 6
1
6
1 8
6 6
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 30 order of tracks desired to listen may
be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat
function.
If the CD function is selected, stop the player by pressing .
Load the selected CDs.
Press Program.
Result: The following indications are displayed:
(01 = Program no., DI = Disc no., – – – = Track no. on the disc)
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
Select the required track by turning the Multi Jog knob:
To the left to move back through the tracks
To the right to move forward through the tracks
Press Program to confirm your selection.
Result: The selection is stored and is dis-
played.
To select other tracks, repeat Steps 4 to 6.
Press VCD/CD ( ) to listen to the track selection in the order programmed.
To... Turn the Multi Jog knob...
Listen to the current track again One notch to the left
Listen to the previous track Two notches to the left
Listen to the next track One notch to the right
Skip forwards or backwards one The appropriate number of
or more tracks notches to the right or to the left
To cancel the selection, press .
Once if the compact disc player is stopped
Result:
PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the / buttons to select the required
tracks in step 5, 9.
8
9
10
Mul ti Function Multi Jog
Mono/ST
REC/Pause
Down
PREV. Next
Normal
Dubbing
HI - Speed
CD
Synchro
Program
Shuffle
Retu
CD
Repeat
Preset/
Memory
Deck 1/2 REV.Mode
VCD/CD
AUX TAPE
TUNER
Band
D / P / S
DIRECT PLAY & SELECTION
CD–R/RW PLAYBACK
Up
Tuning Mode
-- Disc Selection / Direct Play --
Disc 1 Disc 2 Disc 3
7
Disc 1 Disc 2 Disc 3
VCD/CD
Tuning Mode
4
8
3,6
5,9
Programming the Order of Playback
1
2
3
4
5
6
1,10
MAX-VL69GB-1~18 11/11/02 4:40 PM Page 15