Samsung AH68-00939B - Manual (Page 21)

GB
21
Always treat your cassettes with care; refer, if necessary, to
the section entitled “
Precautions When Using Audio Cassettes”
on page 27.
Switch the system on by pressing the On/Standby button.
Select the TAPE function by pressing TAPE on the front panel.
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT (
) is written.
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
To listen to... Press ...
Side A TAPE ( ) once DECK 1 and DECK 2
Side B TAPE ( ) twice DECK 2 only
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
as required.
To... Press ...
Rewind the cassette
Fast-forward the cassette
You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
Switch the system on by pressing On/Standby.
Insert a blank cassette in Deck 2.
Select the VCD/CD function by pressing VCD/CD on the front panel.
Load a compact disc.
Select the required disc.
Select the required track and press CD Synchro or press
CD Synchro directly to start recording at the beginning of the disc.
Result:
REC is displayed and recording starts.
To stop recording, press .
The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
Switch your system on by pressing On/Standby.
Insert a blank cassette in Deck 2.
Select the VCD/CD function by pressing VCD/CD on the front panel.
Load the compact disc.
Select the required disc.
Select the required track on the compact disc and press on the front
panel or on the remote control to set the compact disc player to Pause
mode.
Press the REC/Pause.
Result:
REC is displayed.
Press the to start playing the track.
Result: The track is recorded on the cassette.
To stop recording, press .
CD Synchro Record Feature
Recording a Compact Disc
Listening to a Cassette
1
2
3
4
5
6
7
8
On/Standby
Mul ti Function
Demo
Timer
/Clock
Timer
On/Off
Mono/ST
REC/Pause
Down
PREV. Next
Normal
Dubbing
HI - Speed
CD
Synchro
Prog
Shuff
Preset/
Memory
Deck 1/2 REV.Mode
VCD/CD
AUX TAPE
TUNER
Band
D / P / S
DIRECT PLAY & SELECTION
CD–R/RW PLAYBACK
Up
Tuning Mode
AI Sleep
MIC Mixing
Echo
MIC 1
MIC 2
MIN MAX
Volume
+
_
On/Standby
Mul ti Function Multi Jog
Demo
Timer
/Clock
Timer
On/Off
Mono/ST
REC/Pause
Down
PREV. Next
Normal
Dubbing
HI - Speed CD Synchro
Program
Shuffle
Return/Enter
Power Surround
S.BASS
E Q
D.S.P
Phones
CD
Repeat
Preset/
Memory
Deck 1/2 REV.Mode
VCD/CD
AUX TAPE
TUNER Band
D / P / S DIRECT PLAY & SELECTION
CD–R/RW PLAYBACK
Up
Tuning Mode
AI Sleep
MIC Mixing
Echo
MIC 1
MIC 2
MIN MAX
1
1
2
3
4
5
6
7
2
3
4
5
6
7
8
9
Volume
+
_
On/Standby
Mul ti Function Multi Jog
Demo
Timer
/Clock
Timer
On/Off
Mono/ST
REC/Pause
Down
PREV. Next
Normal Dubbing
HI - Speed
CD Synchro
Program
Shuffle
Return/Enter
Power Surround
S.BASS
E Q
D.S.P
Phones
CD Repeat
Preset/
Memory
Deck 1/2 REV.Mode
VCD/CD
AUX TAPE
TUNER
Band
D / P / S
DIRECT PLAY & SELECTION
CD–R/RW PLAYBACK
Up
Tuning Mode
AI Sleep
MIC Mixing
Echo
MIC 1
MIC 2
MIN MAX
VCD/CD
TAPE
Down
PREV. Next
Up
1
Tuning Mode
Tuning Mode
VCD/CD
2,7
6
8 8
9
7
3,6,8
1
7
6
3
1
MAX-VL69GB-19~29 11/11/02 4:46 PM Page 21