Sharp UX-340L - Manual (Page 98)

Caller ID
96
•
If you want to make a voice call,
pick up the handset or press the
SPEAKER
key. Dialing will begin
automatically. (If you pressed the
SPEAKER
key, pick up the
handset when the other party
answers.)
4
Press the STOP key when you have
finished viewing the list.
To delete calls from the Caller ID list
If you want to delete a single call from the caller list, press the 0 key
while the call appears in the display. If you want to delete all calls
from the list, hold the 0 key down for at least 3 seconds while you are
viewing any number in the list.
Priority Call
If desired, you can set your fax to make a special ringing sound when
you receive a call from a designated phone number. This lets you
know immediately who is calling without having to look at the
display.
To use this function, enter the desired phone number by following the
steps below (only one phone number can be entered).
1
Press these keys:
The display will show:
PRIORITY CALL #
3
STOP
FUNCTION
all-ux340L.book Page 96 Thursday, December 23, 1999 5:37 PM