Samsung 130 - Manual (Page 15)

ENGLISH
READY
Connecting to Power
There are two ways in which to provide the camera with power.
One is using batteries (AA Alkaline), alternatively use an AC Adapter (DC 6V / 2.5A).
Open the battery chamber cover by pushing in
the direction of the arrow. 1
Insert the batteries taking note of the polarity (+ / -). 2
Using the batteries
To close the battery chamber cover, push it until it
clicks. 3
Important information about battery usage
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leak if kept inside the camera.
Do not use manganese batteries as they cannot deliver sufficient power.
Low temperatures (below O C) can cause the camera to work for a shorter period
of time due to reduced battery performance. The batteries will recover at normal
temperatures.
Do not use old and new batteries or different types together.
Extended use of the camera may cause the camera body to become warm.
This is perfectly normal.
If you are planning to use this camera for long periods of time, it is advisable to use
an AC adapter.