Sony KD-30XS955 - Manual (Page 101)

100
O
ther
Inf
o
SETU
P
Oth
e
r I
n
fo
SETU
P
Ot
h
e
r
SETU
P
Audio
MPEG1 movie does not
play back correctly ❏ Some variations of MPEG1 movies may not be compatible with the
Memory Stick Viewer.
MPEG1 quality is poor when
enlarged (page 71) ❏ The quality of the movie when enlarged depends on the resolution of the
MPEG1 file. See your camera’s instruction manual for details.
Error message
is displayed ❏ No Memory Stick There is no Memory Stick in the slot.
❏ Memory Stick
Locked The lock mechanism on the Memory Stick is
engaged.
❏ Memory Stick Error The Memory Stick in the slot might be damaged;
try a different Memory Stick.
❏ Format Error The Memory Stick may have been formatted using
a PC or other device that is not compatible with
cameras.
Error icon is displayed The file is not a valid MPEG1 or JPEG format.
The thumbnail is not DCF-compatible.
The file is a JPEG or an MPEG1, but the thumbnail
is unreadable.
The file is unreadable.
Problem Possible Remedies
Problem Possible Remedies
Good picture,
no sound ❏ Press MUTING so that the word Muting disappears from the screen (see page
47).
❏ Make sure the Speaker option is set to On in the Audio Menu (see page 81).
❏ Make sure the MTS option is set to Stereo or Mono (see page 80).
Cannot gain enough volume
when using a cable box ❏ Increase the volume of the cable box using the cable box’s remote control.
Then press
TV FUNCTION and adjust the TV’s volume.
Sound seems weak or
insufficient ❏ The TV’s audio might be set to Auto SAP or Mono , when it might be better set
to Stereo . In the Audio Menu (see page 80), set the MTS setting to Stereo . If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external audio speakers ❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 80). Or, to use the TV remote control, set the
Audio Out option to Variable.
❏ To turn on the TV speakers, set the Speaker option to On (see page 80).
XS.book Page 100 Tuesday, June 8, 2004 1:40 PM