Sony KD-30XS955 - Manual (Page 38)

37
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
DVI-Equipped
Device If you have a device, such as an HDTV receiver, that has DVI (Digital
Video Interface) output, use the following connection.
To connect a device that has DVI OUT:
1 Use an HDMI-to-DVI cable to connect the device’s DVI OUT jack
to the TV’s HDMI IN jack.
2 Use an audio cable to connect the device’s audio output jacks to
the TV’s HDMI analog audio input jacks.
Note on Using This Connection
✍
You can purchase HDMI cables (or cable adapters) at your local electronics
store.
To Do This ... Do This ...
Watch the DVI device Press TV/VIDEO repeatedly to select the VIDEO 7 input.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 90.
TV
HDTV Receiver
HDMI-to-DVI cable
Audio cable
XS.book Page 37 Tuesday, June 8, 2004 1:40 PM