Sony PCWA-C150S - Manual (Page 34)

34
Setting up the connection environment
Windows Me or Windows 2000
Establishing communication with the Access Point
This section describes how to configure settings for communication with an
Access Point. When not using an Access Point, see “Configuring
communication settings for Peer-to-Peer Mode” on page 40.
Before configuring the settings, the following tasks must be
completed:
• The Wireless LAN PC Card must be inserted into the computer.
• The Access Point and the computer with the Wireless LAN PC Card
must be located within the communication limits of the Access Point
(approx. 330 feet), and the Access Point must be turned on. For details,
see the Access Point documentation.
• Check the Network Name (also called SSID) and the Data Security (also
called WEP or Encryption) settings of the Access Point. For details about
these settings, consult your network administrator. The factory-settings
for the Access Point are listed in the Access Point documentation.
1
Click the Client Manager icon on the taskbar.
The Client Manager window appears.