Sony PCWA-C150S - Manual (Page 36)

36
4
Enter an alphanumeric name for the profile in the “Profile
Name” field (letters, numbers, and symbols are allowed).
Verify that Access Point is selected in the “Network Type”
list, and click “Next”.
The Identify Your Network window shown below appears.
5
In the “Network Name” field, enter the same Network Name
as set for the Access Point. You can also click “Scan” to
search for Access Points within communication range.
Note
The Network Name is case sensitive. Be sure to use the same uppercase/lowercase
spelling as at the Access Point.
z Tips
• If you leave the Network Name field blank, the computer will attempt to connect
to an arbitrary Access Point within range. If you enter “ANY” (all in uppercase) in
the Network Name field, the computer will attempt to connect to all Access Points
within range.
• If the “Scan” button is dimmed, an Access Point search cannot be performed.
Enter the Network Name set for the Access Point.
6
If you clicked “Scan” in step 5, from the Scan for Network
Name dialog box, select the Access Point to which you want
to connect, and click “OK”.