Sony PCWA-C150S User Manual
Page 38
Advertising
38
3. In the field “Key 1”, “Key 2”, “Key 3”, or “Key 4”, type the
encryption key set at the Access Point.
Notes
• Type the number of characters or digits as indicated below.
Alphanumeric Characters
Hexadecimal
Access Point is encrypted
13 characters
26 digits
with a 128-bit WEP
Access Point is encrypted
5 characters
10 digits
with a 64-bit WEP
• Alphanumeric characters are case sensitive.
• Alphanumeric characters may include symbols.
4. Select the field where you have input the key from the
“Encrypt data with” drop-down list.
9
Click “Next”.
The Power Management window shown below appears.
Advertising