Installing the remote control panel for dos users, Selecting print settings, Printing from dos applications – Samsung ML-1250 User Manual

Page 123

Advertising
background image

A

PPENDIX

A.24

Installing the Remote Control Panel for DOS Users

Selecting Print Settings

The Remote Control Panel utility is provided on the printer
software CD-ROM. If you do not have a CD-ROM drive, refer to
“Installing Software from Diskette” on page

2.13

for

information on obtaining printer software on diskettes.

To install the DOS Remote Control Panel:

1

Insert the printer software CD-ROM or RCP diskette in your
computer’s drive.

2

At the DOS prompt, make a directory that you want to use
for the DOS software and change to that directory.

3

From the floppy drive, type:
COPY x:\*.* (where x is the floppy drive designator)

From the CD-ROM drive, type:
COPY x:\1250\xxx\RCP\*.* (where x is the CD-ROM
drive designator and xxx is the designator for your
language. See the list on the left for the designator for each
language).

Then press Enter.

Code

Language

DEU

German

ENG

English

SPN

Spanish

FRN

French

ITA

Italian

Language Codes

When you are running DOS, you can use this Remote Control
Panel to select print settings that may not be available from
some DOS programs. Typically, duplicate print settings that are
selected from a DOS software program override print settings
selected in the ML-1250 Remote Control Panel.

Note:

After you change the RCP settings, you must send it to

the printer by pressing Send on the RCP screen.

Printing from DOS Applications

Advertising
This manual is related to the following products: