Printing on card stock or custom-sized media, Guidelines – Samsung ML-1250 User Manual
Page 47
P
RINT
M
EDIA
4.13
Printing on Card Stock or Custom-sized Media
2
2
Push the output lever down.
1
1
Load print media in the input tray you
want to use with the print side up,
and the short edge first .
Adjust the guide to fit the width of the
media.
3
3
Configure the paper source, type in the
printer driver’s properties (see page
) and print.
Postcards, 3 by 5 in.(index) cards and other custom-sized media can be printed with
the ML-1250 printer.
Guidelines
• Always insert the short edge into the
input tray first
. If you want to print in landscape
mode, make this selection through your software. Inserting paper long-edge first may
cause a paper jam.
• Do not print on card stocks that is too small or too large. The minimum size is 76 by 127
mm (3 by 5 in.) for the manual input tray and 95 by 127 mm (3.8 by 5 in.) for the
automatic input tray, and the maximum size is 216 by 356 mm (8.5 by 14 in.).
• Set margins at least 6.4 mm (0.25 in.) away from the edges of the media in the software
application.
Note:
If the size of your print media is not
listed in the Paper Size box in the Paper
tab of the printer driver properties, select
Custom Size and set the paper size
manually.