Samsung 570DXN User Manual
Page 14
Rear
Note
• For detailed information concerning cable connections, refer to Connecting Cables under Setup. The LCD
Display 's configuration at the back may vary slightly depending on the LCD Display model.
1)
POWER S/W ON [ | ] / OFF [O]
Switches the LCD Display On/Off.
2)
POWER IN
The power cord plugs into the LCD Display and
the wall plug.
3)
REMOTE OUT/IN
You can use a wired remote control by
connecting it to your monitor.
4)
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
5)
DVI / PC / HDMI IN [PC/DVI/BNC AUDIO
IN] (PC/DVI/BNC/HDMI Audio Connection
Terminal (Input))
6)
DVI / PC / HDMI IN [HDMI]
Connect the HDMI terminal at the back of your
monitor to the HDMI terminal of your digital
output device using a HDMI cable.
7)
DVI / PC / HDMI IN [RGB] (PC Video
Connection Terminal)
Using a D-Sub Cable (15 pin D-Sub) - PC
mode (Analog PC)
8)
DVI / PC / HDMI IN [DVI(HDCP)] (PC
Video Connection Terminal)
Using a DVI Cable (DVI-D to DVI-D) - DVI
mode (Digital PC)