Samsung 570DXN - Manual (Page 143)

4) Type
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER]
You can change the Safety Screen Type.
- Scroll
- Pixel
- Bar
- Eraser
Resolution Select
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER]
When the picture is not displayed properly on the screen when setting the graphics card resolution of the
computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz, by using this
function(Resolution Select), you can have the picture displayed on the screen in the specified resolution.
Available in PC/BNC mode only
1) Off
2) 1024 X 768
3) 1280 X 768
4) 1360 x 768
5) 1366 X 768
Note
• Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768
@ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz.
Lamp Control
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER]
Adjusts the inverter lamp in order to reduce energy consumption.
Note
• This function does not operate when Dynamic Contrast is set to On in AV, S-Video, Component modes.
Power On Adjustment
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨]→ [ENTER]
Adjusts the Power On time for the screen.
*Caution: Set the Power On time to be loger to avoid overvoltage.
FAN
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER]
Adjusts the FAN.
1) Normal
2) Pivot
Note
• When pivoting your monitor, make sure to select PIVOT for the FAN.
Reset
The picture parameters are replaced with the factory default values.
For the DVI source, the Reset function is only available when PC DVI is being used.
1) Image Reset
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >]→ [ENTER]