Samsung 570DXN - Manual (Page 137)

1) 16:9
2) 4:3
PIP Picture
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ /
∨
] → [ENTER] → [< / >] → [ENTER]
Adjusts the PIP Screen Settings.
1) Contrast
Adjusts the Contrast of the PIP window on the screen.
2) Brightness
Adjusts the Brightness of the PIP window on the screen.
3) Sharpness
Adjusts the difference between the lightest and darkest areas of the PIP window.
4) Color
Adjusts the Color of the PIP window on the screen.
5) Tint
Adds a natural tone to the PIP window.
You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI mode.
Operates only if the video signal is NTSC.
Available Modes: PIP ON
Picture [ AV / S-Video / Component / HDMI Mode]
Available Modes
PC / BNC / DVI
AV
S-Video
Component
HDMI
MagicNet
Mode
[MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER]
The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are
preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
1) Dynamic
2) Standard
3) Movie
4) Custom
[The direct button on the remote control is the ' P.MODE ' button.]
Custom
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
By using the on-screen menus, the contrast and brightness can be changed to your personal preference.
1) Contrast
Adds a natural tone to the PIP window.
2) Brightness
Adjusts the Brightness.
3) Sharpness
Adjusts the picture Sharpness.
4) Color
Adjusts the picture Color.
5) Tint
Adds a natural tone to the display.
Operates only for AV and S-Video mode. Operates only if the video signal is NTSC.