Connections, Installing the stand kit – Samsung 570DXN User Manual

Page 26

Advertising
background image

Select Language

Main Page

Model

SyncMaster 570DXn

The color and appearance of the product may vary depending on the model, and the product specifications are
subject to change without prior notice for reasons of performance enhancement.

Connections

Installing the Stand KIT

Note

• Only the supplied bolts should be used.

Caution

Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.

Installing the Semi Stand

Left stand

Right stand

Caution

Make sure to install the stand with the Caution label
folded backwards.

1)

To protect your product, a Cover Hole is included as an accessory. This protects the hole at the bottom of
the monitor where the stand is inserted. If you install a wall mount kit for your monitor, please place the

Cover Hole

over it.

2)

Insert it into the hole at the bottom of the monitor. Insert the screw provided with the Cover Hole into the
marked place and fasten it firmly.

Caution

The resolution may differ for each product model. For information on the optimal resolution, refer to the user
manual.

Safety Instructions

Introduction

Connections

Installing the Stand KIT

Connecting the LCD
Display

Using the Software

Adjusting the LCD Display

Troubleshooting

Specifications

Information

Appendix

Advertising
This manual is related to the following products: