SRS Labs HANNSPREE NTSCTVTWEN1203 - Manual (Page 31)

30
Switching Source Signals
Press SOURCE to select the
incoming source signal.
The current source setting
(TV/CATV, AV1,AV2 or PC )
appears on the upper left corner
of the screen.
Note
The TV supports S-Video input in
addition to normal video and
audio signals. The TV detects the
signal type automatically and
gives priority to S-Video when two
signals are detected at the same time.
Adjusting the Volume
Press the VOL UP button to
increase the volume. Press
VOL DOWN button to
decrease the volume. The
volume level is displayed on
the TV.
ON/OFF MUTE SOURCE MENU < CH > < VOL >
Source
ON/OFF MUTE SOURCE MENU < CH > < VOL >
48
Volume down Volume
level
Volume up