Samsung YP-60 - Manual (Page 10)

19
Manual Installation of the USB Driver
18
Go to “Using yepp Studio” on page 24 if the USB driver is in place.
Follow these steps if the USB driver is not in place.
Check the device manager.
● Windows 98,ME:
Control Panel → System → Device Manager
● Windows 2000:
Control Panel → System → Hardware →
Device Manager
● Windows XP:
Control Panel → System → Hardware →
Device Manager
1
Check if there is a device listed with an
exclamation point or a question mark
(displayed as unknown device or USB device).
2
Double click on the device listed with an
exclamation point or a question mark.
3
After selecting the driver,
click on [Update Driver].
4
Select a compatible driver,
click on [Next] to finish.
5 When an error occurs during installation of the USB driver