Sharp MD-MT180H - Manual (Page 28)

01/10/11 180H_E_5.fm
E-27
MD-MT180H
ENGLISH
Ad
v
a
nced Features
-T
it
li
n
g
a
M
in
iD
is
c
-
Titling a MiniDisc

Creating disc and track names
Load a MiniDisc to be named. A playback only or record-
ing prevented MiniDisc cannot be edited.
1 <Disc name> <Track name>
Whilst in the stop
mode, press the
MENU/CHRG button to
select "EDIT". Whilst in the pause
mode, press the
MENU/CHRG button to
select "EDIT".
2
Press the ENTER/SYNC button.
3 <Disc name> <Track name>
Press the MENU/CHRG
button to select "DISC
NAME". Press the MENU/CHRG
button to select
"TRACK NAME".
4
Press the ENTER/SYNC button.

The unit will enter the character input mode.

To cancel the operation, press the :OFF/HOLD
button.
Cursor
5
Press the button repeatedly to select the type
of characters.
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
6
Press the or button repeatedly to select
the letter.
7
Press the ENTER/SYNC button to enter it.
Position where the next letter will be entered
Note:

Complete the operation within 7 seconds whilst se-
lecting the menus.
(Capital letters) (Lower-case letters) (Numbers and symbols)