Initial operation – Samsung SR-S28NTA User Manual

Page 7

Advertising
background image

6

INITIAL OPERATION

It should be satisfied when you test the refrigerator following below items. If not, check power
supply and electricity state. If you can not any control, contact SAMSUNG service center.

1

Place the shelves and containers
which were removed for transportation
in their appropriate positions.
(refer to pages 21~24)

4

Set temperature control to “HIGH”
position and let refrigerator operate for
one hour. The freezer compartment
should get slightly chilled and the
motor should run smoothly producing
a soft humming noise.

2

Clean refrigerator and parts to remove
dust incurred in shipping and packing.
(refer to pages 26~27)

5

Store food after the temperature in the
refrigerator gets sufficiently low.
It takes a few hours after starting the
refrigerator to reach the proper
temperature.

3

When you plugged the refrigerator in,
interior lamp should light on during
refrigerator door is opened.

Your refrigerator is operated by a compressor
which switchs “on and off” to maintain the internal
temperature. When the compressor is new, it
requires a running in period which can last for up
to 5 months. During this period it may operate
a little noisily. This is quite normal and does not
represent a fault.

SR-S24NTA/ENG(NEW) 11/15/59 3:54 PM Page 7

Advertising
This manual is related to the following products: