Procedure for inserting front and back cover paper, Touch the [paper tray settings] key, Select the tray used for the front cover paper – Sharp AR-M355N User Manual

Page 111: Press the [start] key, Special modes

Advertising
background image

SPECIAL MODES

5-12

Procedure for inserting front and back cover paper

The paper for the front cover is called the front cover paper ("FRONT COVER" in the touch panel). The paper
for the back cover is called the back cover paper ("BACK COVER" in the touch panel).
●Examples of insertion methods for the front and back cover paper are given on pages 5-17 to 5-20.

1

Touch the [COVERS/INSERTS] key in the
special modes screen (2nd screen).

2

Touch the [PAPER TRAY SETTINGS] key.

3

Select the tray used for the front cover
paper.

(1)The tray name (tray position) selected for the

front cover paper and the paper size and type
are shown in (X). If the tray in which you
loaded paper for the front cover is shown, touch
the [OK] key. You will return to the screen of
step 2.

(2)If the correct tray for the cover sheet paper

does not appear in (X), touch the (Y) key. The
tray selection screen will appear. Select the
tray in which you loaded paper for the front
cover. You will return to the screen of above.

4

Touch the [FRONT COVER] key in the
screen of step 2.

5

Set the insertion conditions for the front
cover paper.

(1) Select whether or not the front cover paper is to be

copied on with the (X) keys ([YES] or [NO]).

(2) Select whether one-sided copying or two-sided

copying is to be performed on the front cover
paper with the (Y) keys. This selection is only
possible when the [YES] key of (X) has been
selected. (The one-sided/two-sided selection
made here only applies to the front cover paper.
When the back cover paper is selected, the
selection only applies to the back cover paper.)

(3)The (Z) key shows the tray selected for the front

cover paper in step 3 and the paper size and
type.

6

Touch the [OK] key in the screen of step 5.
You will return to the screen of step 2.

When you return to the screen of step 2, the
[FRONT COVER] key will be highlighted.

7

To insert back cover paper, repeat steps 2
through 6, using the [BACK COVER] key
instead of the [FRONT COVER] key.

8

Touch the [PAGE LAYOUT] key in the
screen of step 7 to display a list of the
selected settings (page 5-15).
To exit the cover/insert settings, touch the
upper [OK] key in the screen of step 7.

9

Press the [START] key.

To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.

SPECIAL MODES

COVERS/INSERTS

TRANSPARENCY

INSERTS

CARD SHOT

BOOK COPY

FRONT COVER

BACK COVER

INSERTION

TYPE A SETTING

PAPER TRAY

SETTINGS

PAGE LAYOUT

CANCEL

OK

INSERTION

SETTINGS

COVERS/INSERTS

INSERTION

TYPE B SETTING

8 x11

PLAIN

1/

2

PAPER TRAY SETTINGS

FRONT COVER

TRAY2

TRAY2

TRAY2

TRAY2

TRAY2

BACK COVER

INSERTION

TYPE A

INSERTION

TYPE B

OK

8 x11

PLAIN

1/

2

8 x11

PLAIN

1/

2

8 x11

PLAIN

1/

2

(X)

(Y)

To cancel covers/inserts settings...
Touch the [CANCEL] key in the screen of step 2.

PLEASE SET UP A FRONT COVER.

FRONT COVER SETTING

PRINT ON FRONT COVER

YES

NO

1-SIDED

2-SIDED

0

OK

CANCEL

PAPER TRAY

TRAY2

8 x11

PLAIN

1/

2

(X)

(Y)

(Z)

PLEASE SET UP COVERS/INSERTS.

SPECIAL MODES

COVERS/INSERTS

FRONT COVER

INSERTION

TYPE A SETTINGS

PAPER TRAY

SETTINGS

PAGE LAYOUT

INSERTION

SETTINGS

INSERTION

TYPE B SETTINGS

BACK COVER

0

OK

OK

CANCEL

Advertising