Where to install your micro component system, Connecting your system to the power supply, Inserting remote control batteries – Samsung MM-B9 User Manual

Page 7: Connecting your system to the power supply 2 3

Advertising
background image

GB

7

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the
voltage.

Check the position of the voltage selector on the rear of the system

(OPTIONAL).

Plug the main lead (marked AC Cord on the rear of the system) into

an appropriate socket.

Press the Standby/On

button to switch your mini-compact system

on.

To take full advantage of your new micro component system, fol-
low these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc
compartment easily.

Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.

Where to Install Your
Micro Component System

Connecting your System to the
Power Supply

2

3

Inserting Remote Control Batteries

Insert or replace remote control batteries when you:

Purchase the micro component system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.

Place your thumb on the position marked on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.

Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:

+ on the battery against + in the battery compartment

on the battery against – in the battery compartment

Replace the cover by sliding it back until it clicks into position.

1

2

3

1

MIC

MIC Mixing

FRONT LOADING MECHANISM

On/Standby

AUX

Phones

Demo

Power

Surround

Volume

Sleep

Mono/ST

Open/Close

Multi Jog

Sound

Mode

S.Bass

Level

REC/Pause

CD Synchro

CD Repeat

TUNER/Band

Tuning Mode

C D

TAPE

Advertising
This manual is related to the following products: