Tuner, Searching for and storing the radio stations, Selecting a stored station – Samsung MM-B9 User Manual
Page 14: Improving radio reception
14
You can store up to:
15 FM stations
(option)
15 AM stations
15 FM stations
8 MW stations (option)
7 LW stations
15 FM stations
5 MW stations
(option)
5 SW1 stations
5 SW2 stations
Switch the system on by pressing On/Standby (
).
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Band on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW(OPTION)
Long Wave
SW1, SW2(OPTION)
Short Wave
To search for a
Press Tuning Mode
station...
Manually
One or more times until
MANUAL
is displayed.
Automatically
One or more times until
AUTO
is
displayed.
PRESET function is explained in detail in the section
“Selecting a Stored Station” on.
Select the station to be stored by:
or
Pressing
or
buttons to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
or
buttons.
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: The
PRGM
is displayed for a few seconds.
b Press
or
to assign a program number between 1 and 15.
c Press Program/Set to store the radio station.
Result:
PROGRAM
is no longer displayed and the station is
stored.
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
You can listen to a stored radio station as follows:
Switch the system on by pressing On/Standby ( ) .
Select the required frequency band by pressing TUNER(Band) on
the front panel.
Select the radio station as follows.
To listen to ...
Press ...
Stored station
1. the Tuning Mode button until “
PRE-
SET
” is displayed.
2.
or
button to select the
required program.
Selecting a Stored Station
1
2
3
Improving Radio Reception
1
2
3
4
5
6
Searching for and Storing the Radio
Stations
GB
Program/
Set
Tuning
Mode
VOL.
Band
VOL.
VOL.
Tuning
Mode
5
4
3
5
4
2
5
On/Standby
AUX
Phones
Demo
Power
Surround
Sleep
Mono/ST
Open/Close
Multi Jog
Sound
Mode
S.Bass
Level
REC/Pause
CD Synchro
CD Repeat
TUNER
/Band
Tuning Mode
C D
TAPE
FRONT LOADING MECHANISM
1
5
4
5
4
5
4
2
3
On/Standby
AUX
Phones
Demo
S
M
REC/Pause
CD Synchro
CD Repeat
TUNER
/Band
Tuning Mode
C D
TAPE
FRONT LOADING MECHANISM
1
3
2
Program/
Set
Mono/ST
Mute
Tuning
Mode
VOL.
Band
VOL.