Sony DSR-DR1000A - Manual (Page 76)

76
Displaying Supplementary Status Information
Cha
p
te
r 6
Men
u
Set
tin
g
factory default settings. Wait until the saving is
completed before powering off the unit.
To cancel the resetting operation
Instead of pressing the SET button, press the RESET
button. The display returns to menu level 1, leaving
the settings unchanged.
Displaying
Supplementary Status
Information
When you set the SUB STATUS menu item (see page 64)
to other than OFF, you can view supplementary status
information on the monitor screen below the operating
mode display area.
The following items of supplementary status information
are displayed depending on the setting of the SUB
STATUS menu item.
The following tables show the on-screen indications of
supplementary information and their meaning.
In each table, the indications given in brackets such as
[ASM] are the indications displayed when the SUB
STATUS menu item is set to ALL.
For the display format when ALL is selected, see the next
section.
Setting of SUB
STATUS menu item Items of supplementary
information displayed
TC MODE Operating mode of the internal time
code generator
REMAIN Remaining capacity of the disk
CLIP NAME Clip name
AUDIO MIXING Setting for input audio mixing
ALL All of the above items
When the SUB STATUS menu item is set to TC MODE:
On-screen
indication Meaning
INT PRST FREE
[IP F] The internal time code generator is
operating in FREE RUN mode.
INT PRST REC
[IP R] The internal time code generator is
operating in REC RUN mode.
INT REGEN-T&U
[IRTU] The internal time code generator is in
synchronization with the playback
time code (LTC) read from tape.
T C R
P L A Y
0 0 : 0 4 4 7 . 0 7
L O C K
.
M I E D X T U V
Supplementary status information