Sony SAT-B2 - Manual (Page 64)

64 Chapter 5: Using the Options Menu
3
Select one of the following:
Changing the Default
Data Service Use the DEFAULT button to select a default data service for all stations
that provide data services.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
2
Select a default data service.
Setting the Baud Rate To set the baud rate for the DSS receiver’s data port:
1
Select BAUD from the Data Services screen.
2
Select a baud rate for the data port.
To Do This ... Do This ...
Change the data service for the
current station only Select the data service and then
select RETURN.
Change the data service for all
stations Select DEFAULT (then see
“Changing the Default Data
Service” below).
Change the baud rate for the DSS
receiver’s wide band data port Select BAUD (then see “Setting
the Baud Rate” below).
The titles of the data services may be
different, based on the service being
provided.
DATA 8
DATA 1 DATA 2 DATA 3 DATA 4
DATA 5 DATA 6 DATA 7
WIDE BAND DATA
RETURN
DEFAULT
BAUD
HELP
DEFAULT DATA
DATA 2
DATA 3
DATA 4
DATA 5
DATA 6
DATA 1
The baud rates displayed may be
different, depending on which data port is
being used.
DATA 8
DATA 1 DATA 2 DATA 3 DATA 4
DATA 5 DATA 6 DATA 7
WIDE BAND DATA
RETURN
DEFAULT
BAUD
HELP
SET BAUD RATE
2400
4800
9600
19200