Seagate Fibre Channel Interface User Manual
Seagate TV Accessories
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1.0 Publication overview
- 2.0 Introduction to Fibre Channel
- 3.0 Fibre Channel standards
- 4.0 Introduction to topologies
- 5.0 Data encoding (FC-1)
- 6.0 Framing protocol (FC-2)
- 7.0 Classes of service (FC-2)
- 8.0 FC Arbitrated Loop concepts
- 9.0 Fibre Channel link services
- 9.1 Basic link services
- 9.2 Extended link services
- 9.2.1 Port Login (PLOGI) (02x)
- 9.2.2 Port Logout (PLOGO) (03x)
- 9.2.3 Fabric Login (FLOGI) (04)
- 9.2.4 Process Login (PRLI)
- 9.2.5 Process Logout (PRLO)
- 9.2.6 Third Party Process Logout (TPRLO)
- 9.2.7 Read Link Error Status Block (RLS)
- 9.2.8 Reinstate Recovery Qualifier (RRQ)
- 9.2.9 Port Discovery (PDISC)
- 9.2.10 Discover Address (ADISC)
- 9.2.11 Report Node Capabilities (RNC)
- 9.2.12 Link Service Reject (LS_RJT)
- 9.3 FC common transport
- 10.0 Enclosure services interface (ESI)
- 10.1 Discovery process
- 10.2 8045 mode
- 10.3 8067 mode
- 10.4 ESI command transfer
- 10.5 Enclosure-initiated ESI transfer
- 10.5.1 EIE Discovery
- 10.5.2 EIE operations
- 10.5.3 Enclosure requested information
- 10.5.3.1 Device Standard Inquiry Data page
- 10.5.3.2 Device Address page
- 10.5.3.3 Loop Position Map page
- 10.5.3.4 Device Identification page
- 10.5.3.5 Device Temperature page
- 10.5.3.6 Port Parameters page
- 10.5.3.7 Link Status page
- 10.5.3.8 Spin-Down Control Action Specific Bits
- 10.5.3.9 ESI data validation
- 11.0 SCSI operations
- 12.0 Commands
- 12.1 Change Definition command
- 12.2 Compare command
- 12.3 Copy command
- 12.4 Copy and Verify command
- 12.5 Format Unit command
- 12.6 Inquiry command
- 12.7 Lock-Unlock Cache (10) command
- 12.8 Lock-Unlock Cache (16) command
- 12.9 Log Select command
- 12.10 Log Sense command
- 12.10.1 Error Counter pages, Write, Read, Read Reverse, and Verify (code 02, 03, 04, and 05h)
- 12.10.2 Non-Medium Error page (code 06h)
- 12.10.3 Temperature page (code 0Dh)
- 12.10.4 Device Self-Test Results Log page (code 10h)
- 12.10.5 Cache Statistics page (code 37h)
- 12.10.6 Factory Log page (code 3Eh)
- 12.11 Mode Select (6) command
- 12.12 Mode Select (10) command
- 12.13 Mode Sense (6) command
- 12.13.1 Unit Attention page (00h)
- 12.13.2 Error Recovery page (01h)
- 12.13.3 Disconnect/Reconnect Control page (02h)
- 12.13.4 Format Parameters page (03h)
- 12.13.5 Rigid Disc Drive Geometry Parameters page (04h)
- 12.13.6 Verify Error Recovery page (07h)
- 12.13.7 Caching Parameters page (08h) for Mode Sense/Mode Select
- 12.13.8 Mode Sense/Mode Select Control Mode page (0Ah)
- 12.13.9 Notch page (0Ch)
- 12.13.10 XOR Control Mode page (10h)
- 12.13.11 Fibre Channel Interface Control page (19h)
- 12.13.12 Power Condition page (1Ah)
- 12.13.13 Informational Exceptions Control page (1Ch)
- 12.14 Mode Sense (10) command
- 12.15 Move Medium command
- 12.16 Persistent Reserve In command
- 12.17 Persistent Reserve Out command
- 12.18 Prefetch (10) command
- 12.19 Prefetch (16) command
- 12.20 Prevent/Allow Medium Removal command
- 12.21 Read (6) command
- 12.22 Read (10) command
- 12.23 Read (12) command
- 12.24 Read (16) command (88h)
- 12.25 Read Buffer command
- 12.26 Read Capacity (10) command
- 12.27 Read Capacity (16) command
- 12.28 Read Defect Data (10) command
- 12.29 Read Defect Data (12) command
- 12.30 Read Element Status command
- 12.31 Read Long command
- 12.32 Reassign Blocks command
- 12.33 Receive Diagnostic Results command
- 12.34 Release (6) command
- 12.35 Release (10) command
- 12.36 Report Device Identifier command
- 12.37 Report LUNs command
- 12.38 Request Sense command
- 12.39 Reserve (6) command
- 12.40 Reserve (10) command
- 12.41 Rezero Unit command
- 12.42 Search Data Equal command
- 12.43 Search Data High command
- 12.44 Search Data Low command
- 12.45 Seek (6) command
- 12.46 Seek (10) command
- 12.47 Send Diagnostic command
- 12.48 Set Device Identifier command
- 12.49 Set Limits command
- 12.50 Start/Stop Unit command
- 12.51 Synchronize Cache (10) command
- 12.52 Synchronize Cache (16) command
- 12.53 Test Unit Ready command
- 12.54 Verify (10) command
- 12.55 Verify (12) command
- 12.56 Verify (16) command
- 12.57 Write (6) command
- 12.58 Write (10) command
- 12.59 Write (12) command
- 12.60 Write (16) command
- 12.61 Write and Verify (10) command
- 12.62 Write and Verify (12) command
- 12.63 Write and Verify (16) command
- 12.64 Write Buffer command
- 12.65 Write Long command
- 12.66 Write Same (10) command
- 12.67 Write Same (16) command
- 12.68 XDRead (10) command
- 12.69 XDRead (32) command
- 12.70 XDWrite (10) command
- 12.71 XDWrite (32) command
- 12.72 XDWriteRead (10) command
- 12.73 XDWriteRead (32) command
- 12.74 XPWrite (10) command
- 12.75 XPWrite (32) command
- 13.0 Drive features
- 14.0 Seagate Technology support services
- Index