Samsung CL-29Z40MQ - Manual (Page 11)

Y
O U R
N
E W
T V
English - 11
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 13~20.
ΠAudio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
´ Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
ˇ Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
¨ Component Input jacks
(Y, P B , P R , AUDIO-R/L)
Connect to the Component audio and video
outputs of a DVD or DTV set-top box. 480i video
signal input is available.
ˆ UPGRADE PORT (USB)
For service only.
Ø ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN
(AIR)” and “ANT 2 IN (CABLE)” terminals to
receive a signal from VHF/UHF antennas or your
cable system.
• Please be sure to match the color coded input terminals and cable jacks.
AA68_03783B_02_LEng 9/12/06 5:37 PM Page 11