Samsung CL-29Z40MQ - Manual (Page 31)

O
P E R AT I O N
English - 31
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press CH or CH , the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
To select a channel over 100, press the “
-
” button. (For channel “122”, press the +100
button, then “2”, then “2”.)
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2” then “7”.
The TV will change channels when you press the second number.
Using the PRE-CH Button to Select the Previous Channel
œ To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
buttons to select the second
channel. Then, use the PRE-CH
button to quickly alternate
between them.
Using the “-” Button in DTV mode
The “-” button is used to select channels that broadcast a digital signal.
For example, for channel 7 (digital),
press “7”, then “-”, then “1” and
you will see as left.
Alternate method:
Press the PRE-CH button.
The TV changes to the
last channel you were
watching.
DTV 7 - 1
TV #1
English
AA68_03783B_02_LEng 9/12/06 5:37 PM Page 31