Samsung CL-29Z40MQ - Manual (Page 32)

O
P E R AT I O N
English - 32
Labelling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, “CNN1”, etc.). A label consists of four fields, where each field is a letter, a number
or a blank. When the INFO button is pressed, the channel label will appear next to the
channel number.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
2
Press the ▲ or ▼ button
to select “Name”, then
press the ENTER button.
Press the … or † button
to select the channel to be
assigned to a new name,
then press the ENTER
button.
3
Press the … or † button
to select a letter, a number
or a blank. (Results in this
sequence: A...Z, 0...9,
blank, *, -.)
Press the √ button to
switch to the next field,
which will be selected.
Select a second letter or digit by pressing the … or † button, as
above.
Repeat the process to select the last two digits.
When you have finished, press the MENU or ENTER button.
Press the EXIT button to exit.
Move Enter Return
Channel
Antenna : Air √ √
Auto Program √ √
Add/Delete √ √
Fine Tune √ √
Name √ √
Signal Strength √ √
Move Enter Return
Name
… … More
Air 2 : - - - -
Air 3 : - - - -
Air 4 : - - - -
Air 5 : - - - -
Air 6 : - - - -
† † More
Move Adjust Return
Name
… … More
Air 2 : - - - -
Air 3 : - - - -
Air 4 : - - - -
Air 5 : - - - -
Air 6 : - - - -
† † More
A
œ If you add or delete the TV channel,
the corresponding label information
will also be added or deleted.
AA68_03783B_02_LEng 9/12/06 5:37 PM Page 32