Cleaning and maintenance, Cleaning, Self-clean – Siemens HB30S51UC User Manual

Page 37: Press self clean, Press start, Note, Avoid these cleaners

Advertising
background image

English 34

Cleaning and Maintenance

Cleaning

Self-Clean

During Self-Clean, the oven is heated to a very high temperature. Soil is burned off
at this temperature.

IMPORTANT:

Wipe out excessive spillage before self-cleaning the oven.

IMPORTA NT:

Do not clean parts or accessories in the Self-Clean oven.

To set the Self-Clean mode:

1.

Press self clean.

The "self-clean" menu appears:

2.

Use the slider to set the cleaning time (1:30 to 2:30 hours).

3.

If desired, press cook/stop time and set a stop time.

4.

Press start.

Self-Clean starts. The oven is locked during Self-Clean mode. The message
"Door is locked" appears in the display.

Press on/off to cancel Self-Clean.

Once the oven has cooled down, wipe up the remaining ash in the oven with a wet
towel.

Note:

The oven light cannot be turned on during self-cleaning.

The special heat-resistant enamel and the polished components in the oven can
become discolored over time. This is normal and does not affect operation. Do
not use scouring pads or abrasive cleaners to treat discolorations.

In double oven models, Self-Clean is only available for one oven at a time, and
the other oven must be turned off.

Avoid These Cleaners

Do not use commercial oven cleaners such as Easy Off®. They may damage the
oven finish or parts.

Never use scouring pads or abrasive cleaners.

10:30 am

SELF-CLEAN

Cleaning-time

2:30

Press START to begin

Advertising
This manual is related to the following products: