7. matching connector/cable, 8. signal inputs/outputs – Sony PFV-SP3100 User Manual
Page 12
PFV-SP3100
1-8 (E)
1-7. Matching Connector/Cable
When external cables are connected to the connectors on the PFV-SP3100 rear panel, the hardware listed below (or the
equivalent) must be used.
PFV-SP3100 connector
Matching connector/cable
Print on
Connector type
Connector type
Sony Part Number
REMOTE
BNC, 75
Z
BNC, 75
Z
1-569-370-12
REF IN A/B
Belden 1694 coaxial cable
–
STATUS OUT
D-sub Mini 15-pin, Female
D-sub Mini 15-pin, Male
–
1-8. Signal Inputs/Outputs
The input and output signals of the connector on the rear panel are as shown here:
STATUS OUT (D-sub Mini 15-pin, female)
Pin No.
I/O
Signal
Function (All pins are low in level
Description
under normal conditions)
1
O
PS-A ERROR OUT
State of power unit A
The output of power unit A is abnormal.
The fan of power unit A stops.
2
O
PS-B ERROR OUT
State of power unit B
The output of power unit B is abnormal.
The fan of power unit B stops.
3
O
FAN ERROR OUT
State of frame ventilation fan
The frame ventilation fan stops.
4
O
BOARD ERROR
Error status output of optional board
Error output from optional board
OUT
Overpower consumption from optional board
5
O
BOARD WARNING
Warning status output of optional board
Warning output from optional board
OUT
6
O
BOARD ERROR 1
Error status output of board installed in
Error output from the optional board installed in
OUT
the No.1 slot
the No.1 slot.
7
O
BOARD ERROR 2
Error status output of board installed in
Error output from the optional board installed in
OUT
the No.2 slot
the No.2 slot.
8
O
BOARD ERROR 3
Error status output of board installed in
Error output from the optional board installed in
OUT
the No.3 slot
the No.3 slot.
9
O
BOARD ERROR 4
Error status output of board installed in
Error output from the optional board installed in
OUT
the No.4 slot
the No.4 slot.
10
O
BOARD WARNING
Warning status output of board installed
Warning output from the optional board installed
1 OUT
in the No.1 slot
in the No.1 slot.
11
O
BOARD WARNING
Warning status output of board installed
Warning output from the optional board installed
2 OUT
in the No.2 slot
in the No.2 slot.
12
O
BOARD WARNING
Warning status output of board installed
Warning output from the optional board installed
3 OUT
in the No.3 slot
in the No.3 slot.
13
O
BOARD WARNING 4
Warning status output of board installed
Warning output from the optional board installed
OUT
in the No.4 slot
in the No.4 slot.
14, 15
–
GND
1-7. Matching Connector/Cable
1-8. Signal Inputs/Outputs
5
1
10
6
15
< External view >
11