Samsung SMO-211QN User Manual

Page 26

Advertising
background image

Eng-26

5. Connecting Cables

1) Connecting the RJ-11

cable to the RJ-11 connector
on the case-rear and connect
the camera cable to the cable
terminal on the case- rear.

2) Pass the cables through the

hole on the corner mount as
shown in the picture to the right.

6. Assemble the case-rear onto the

corner mount by aligning the two
holes of the case-rear to the
protrusions of the corner mount

and fasten the

screw-tappings (PH M3 X 16).

7. Adjust the direction of the lens.

1) Use a the philips head screwdriver

to turn the screw (indicated by
the arrow in the illustration)

counterclockwise slightly.

The lens body will move.

2) Tilt the lens body down about

10° from the horizontal, and

then turn the screw clockwise
to fasten it.

SCREW-TAPPING
(PH M3 x 16)

SCREW-TAPPING
(PH M3 x 16)

Screw

Advertising
This manual is related to the following products: